SS 50 Series System is complex system used for seperation of liquid from chips which come out from processing center.

Coolant liquid is filtered after it is seperated from chips, and pumped back to the system. Thus, coolant recovery is provided. Humidity rate of chips is reduced below %3 percent after centrifuge process. Also, this rate may vary depending on climate conditions and environment temperature, but tested rate is %3 percent and below under normal conditions.

Maximum capacity  for steel chips is 600 kg/h. Capacity of the centrifuge may vary depending on the material type of chips. Chips should be broken (not exceed 20-30mm) before it is centrifuged in this system.

S series system allows chips to become more valuable when it is dried and allows to reuse of the recovered oil. On the other hand, seperation of the chip and oil from each other makes the scrap chips out of the scope of toxic waste.